Stickler Vellum Wash Off

Stickler Vellum Wash Off is a smooth white uncoated woodfree paper designed for forms, data and thermal transfer labelling. Coated with a water removable adhesive.

    Face Material:

    Type

    Smooth paper

     

    Colour and finish

    White

     

    Weight

    68g/m² ±10%

    ISO-536

    Thickness

    77µ ±10%

    ISO-534

    Adhesive:         WR40

     Water based acrylic. Permanent, water removable.

    Reference

       WR 40

    Type

    Acrylic, water removable

    Service Temp.

    -20ºC / +60ºC

    Min. Appl. Temp.

    + 5ºC

    Shear

    Low

    Tack

    10 N/inch²

    Final adhesion

    9 N/inch

    Shelf life:        36 months, applicable only to the material delivered by the mill which has not undergone further processing, under the following storage conditions:

    Yellow glassine:     YG yellow glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.

    Type

    Glassine paper

     

    Colour and finish

    Yellow

     

    Weight

    60gsm ±10%

    PP-032 – ISO 536

    Thickness

    54microns ±10%

    ISO 534

    Transparency

    >50%

    DIN 53 147-64

    - This material must be stored at a temperature of 22ºC ± 2ºC and 50 ± 5% of relative humidity. - Storage area must be dry and clean. - Keep the material in the original packaging when not used in order to protect it from dust and contamination. - Do not expose to direct sunlight or heat sources.
    Labels for EDP printers with controllable release
    Suitable with different printing systems (letterpress, flexo etc), laser and EDP printers. Testing for suitability between media, printers and inks is always recommended prior to use.
    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.