Stickler Thermal TC S13

Stickler Thermal TC S13 is a one side protected thermo-reactive coated white paper giving optimum protection against external influences.

    Face Material:

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    79 ± 5 g/m2

    Caliper

    ISO 534

    84 ± 5 microns

    Adhesive:   S-Type    Extra Permanent

    A water borne acrylic emulsion with excellent final tack. Adheres easily with minimal pressure, particularly suitable for applications where an high tack level is required.

    Properties

        Result

    Composition

    Water based acrylic

    Minimum Application Temperature

    5ºC  – 45 ºC  

    Service Temperature

    -20 ºC  to +70 ºC

    Food contact

    Indirect

    Ball Tack

    17 +/- 3 

    Adhesive Stength

    SUS >1000 gf/25mm  

     

    PE >700  gf/25mm   

    Laminate:       Laminate Shelf Life             24 months stored at 23ºC/50% RH

                                      Typical Laminate Calliper       156 microns (160gsm

    White glassine -  WG white glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    62 gsm

    Caliper

    ISO 534

    53 microns

    Opacity

    ISO 2471

    60%

    The substrate should be free of dust and lubricant before apply. Please use once unwrapped, if stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under use condition to ensure it meets the requirements of the specific application.
    Stickler Thermal TC can be printed with a variety of print techniques however like all thermal papers, exposure to high temperatures while drying should be avoided.
    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.