Stickler Thermal TC RP1011

Stickler Thermal TC is a high sensitive top-coated direct thermal paper offering superior smudge resistance and barrier coating to prevent character distortion and optimum scanning quality. This product is produced with a smooth crisp surface for excellent colour reproduction and character recognition.

    Face Material:

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    72 ± 5g/m2

    Caliper

    ISO 534

    79 ± 5 microns

    Adhesive:    RP1011-Type Extra Permanent (Hot Melt)
    A rubber based hot-melt adhesive with high tack and adhesion, particularly on difficult and apolar substrates (PE,PP). Improved recipe for high speed converting.

    Properties

    Results

    Composition

    Rubber based hot-melt

    Minimum application temperature

    0°C

    Service temperature

    -20 to +70°C

    Food contact

    Dry and moist direct

    Tack FTM9 N/Inch2

    19

    Ultimate adhesion FTM2 N/Inch

    12

    Laminate:

    Laminate shelf life

    24 months stored at 23°C/50% RH

    Typical Laminate

    153 microns    ISO 534

     

    155 GSM         ISO 536

    WG White glassine - White glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    63 gsm

    Caliper

    ISO 534

    56 microns

    Opacity

    ISO 2471

    45%

    The substrate should be free of dust and lubricant before application. Please use once unwrapped, if stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under end use conditions to ensure it meets the requirements of the specific application.

    ▪ Barcode labels

    ▪ Fish & meat labels

    ▪ Cold store labels

    ▪ Promotional labels

    Stickler Thermal TC can be printed with a variety of print techniques however like all thermal papers, exposure to high temperatures while drying should be avoided.
    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.