Stickler Thermal TC RP1003 WG62
Face Material:
Properties |
Test Method |
Result |
Grammage |
ISO 536 |
74 ± 10g/m2 |
Caliper |
ISO 534 |
76 ± 10 microns |
Adhesive: RP1033 -Type Extra Permanent (Hot Melt)
A rubber based hot-melt adhesive with high tack and adhesion, particularly on difficult and apolar substrates (PE,PP). Improved recipe for high speed converting.
Properties |
Results |
Composition |
Rubber based hot-melt |
Minimum application temperature |
0°C |
Service temperature |
-20 to +70°C |
Food contact |
Dry and moist direct |
Tack FTM9 N/Inch2 |
15 |
Ultimate adhesion FTM2 N/Inch |
14 |
Backing:
WG White glassine - White glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
Properties |
Test Method |
Result |
Grammage |
ISO 536 |
62 gsm |
Caliper |
ISO 534 |
55 microns |
Opacity |
ISO 2471 |
45% |
Laminate:
Laminate shelf life |
24 months stored at 23°C/50% RH |
Typical Laminate |
153 microns ISO 534 |
|
155 GSM ISO 536 |
The substrate should be free of dust and lubricant before application. Please use once unwrapped, if stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under end use conditions to ensure it meets the requirements of the specific application.
- Barcode labels
- Fish & meat labels
- Cold store labels
- Promotional labels