Stickler Thermal TC R80 (Removable)

Stickler Thermal TC is a one sided protected thermo-reactive coated white removable paper giving optimum protection against external influences.

    Face Material:

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    79 ± 5 g/m2

    Caliper

    ISO 534

    84 ± 5 microns

    Adhesive:

    R80 Removable -   A water bourne acrylic emulsion formulated for general purpose removability.

    R80 displays good removability on most surfaces, especially on glass, plastic and metal without leaving glue residue.

    Properties

        Result

    Composition

    Water bourne acrylic

    Inital tack

    650g/25mm  

    Adhesion

    650g/25mm

    Ball tack

    12mm

    Minimum application temperature

    +5°C to +40°C

    Service temperature

    -20°C to +70°C

    Food contact

    Direct food contact for dry non-fatty foods

    Laminate:     Laminate Shelf Life                  24 months stored at 23ºC/50% RH

                                    Typical Laminate Calliper       152 microns (157gsm)

    White glassine - WG white glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    62 gsm

    Caliper

    ISO 534

    53 microns

    Opacity

    ISO 2471

    60%

    The substrate should be free of dust and lubricant before apply. Please use once unwrapped, if stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under use condition to ensure it meets the requirements of the specific application.
    Stickler Thermal TC can be printed with a variety of print techniques however like all thermal papers, exposure to high temperatures while drying should be avoided.
    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.