Stickler Thermal Eco AP999 WG60

Stickler Thermal Eco AP999 WG60 is used for labels for weight-price and other variable information. Suitable for thermal printers. Testing for suitability between media and printers is always recommended prior to use.

     Face Material

    Type:

    Eco thermal paper

    Color and Finish:

    White

    Weight:

    70 g/m² ±10% ISO 536

    Thickness:

    71 μ ±10% ISO 534

    Adhesive

    Reference: AP999

    Type: Super permanent acrylic

    Min. Appl. Temp.: 0℃

    Service Temp.: -40°C/ +100°C

    Tack: 12 N/inch² FTM9

    Final Adhesion: 10 N/inch FTM2

    Liner

    Type:

    One side siliconised glassine

    Color and Finish:

    White

    Weight:

    60 g/m² ±10% ISO 536

    Thickness:

    54 μ ±10% ISO 534

    Transparency:

    >45% DIN 53 147-64

    The material must be stored at a temperature of 23°C +/- 2°C and 50% +/- 5% of Relative Humidity. Do not expose to direct sun light. The area must be dry and clean. Please keep the material in the original packaging when not used in order to protect it from dust and contaminations. All values presented in this data sheet are typical. Ritrama’data sheets provide only the general characteristics of the Product. It is the responsibility of the Customer and/or End User to determine that the Product is fit for the purpose for which the Customer and/or End User wish to use it. Ritrama can give no guarantee beyond the information given in the data sheet.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.