Stickler PP68 CAV AP901 PET

Stickler PP68 Cav is a top coated Cavitated polypropylene film produced with improved stiffness and bulk for high speed application and die-cutting. Designed with a smooth consistent finish for optimum screen and print resolution, Stickler PP68 Cav provides exceptional print performance through the complete array of print processes (flexo, letterpress, screen etc).

    Face Material:

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    53 g/m2

    Caliper

    ISO 534

    68 microns

    UV exposure

    Depending on ink coverage:

    6 month


    Adhesive:
     AP901   General Purpose Permanent  

    Permanent pure acrylic adhesive designed for films. Featuring high cohesion, good clarity and very good performance on apolar substrates (PE,PP), approved for direct contact on the skin (plasters)

    Properties

    Test Method

    Composition

    Water based acrylic

    Direct sunlight resistance

    Excellent

    Cohesion

    High

    Application temperature (min)

    -5°C

    Service Temperature

    -40°C + 120°C

    Tack FTM9

    8N/Inch

    Ultimate adhesion FTM2

    7N/Inch


    Laminate:  

    Laminate shelf life

    24 months stored at 20°C/50%RH

    Typical laminate caliper

    110ums ± 5

    Typical laminate weight

    102gsm ± 5


    This technical specification includes our experience and knowledge regards the following:

    a)     The composition of our products

    b)     Their generic adhesive qualities normalised by means of the ISO procedure and regarding the international rule Finat generally accepted in this sector.

    Any reference to final use is subjected to our good knowledge and opinion and does not imply specific irrevocable guarantees for final use in end product labelling and packaging.

    Over and above these standards the product user is responsible for assessing, testing, and ensuring the specific scope of the label in certain applications by means of prior generic official approval.             


    PET23

    A one sided siliconised polyester liner for maximum strength on application and ideal glue coverage allowing no adhesive lines or distortion.

    Properties

    Result

     

    Weight

    32 g/m² ± 10%

    PP-032-ISO 536

    Thickness

    23 um ± 10%

    ISO 534

    Recommended for FMCG, beverage, water, cosmetic and healthcare labels

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.