Stickler PP White TC AP901

Stickler PP White TC AP901 is a white solid polypropylene film with an extremely glossy finish for supreme 4-colour reproduction and exceptional print results. Top Coated to provide good ink key.

    Face Material: 


    Test Method



    ISO 536

    55 g/m2


    ISO 534

    75 microns


    AP901   General Purpose Permanent: Permanent pure acrylic adhesive designed for films. Featuring high cohesion, good clarity and very good performance on non-comparable substrates (PE,PP), ISEGA certified for direct food contact.


    Test Method


    Water based acrylic

    Direct sunlight resistance




    Application temperature

    -40°C to +120°C

    Tack FTM 9

    8 N/Inch 2

    Ultimate adhesion FTM 2

    7 N/Inch


    Laminate Shelf Life

    24 months stored at 20°C/50% RH

    Typical laminate calendar

    154 ± 6 ums

    Total weight

    143 ± 6 RIT.PP-032


    This technical specification includes our experience and know-how regards the following:

    a)     The composition of our products.

    b)     Their generic adhesive qualities normalised by means of the ISO procedure and regarding the international rule Finat generally accepted in this sector.

    Any reference to final use is subjected to our good knowledge and opinion and does not imply specific irrevocable guarantees for final use in end product labelling and packaging.

    Over and above these standards the product user is responsible for assessing, testing and ensuring the specific scope of the label in certain applications by means of prior generic official approval.

    WG  1side siliconised supercalendered white glassine

    Laminate Shelf Life

    24 months stored at 20°C/50% RH

    Typical laminate calendar

    154 ± 6 microns

    Total weight

    143 ± 6 RIT.PP-032

    Recommended for labels where a stiffer substrate is required for better application and label performance e.g. beverage labels.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.