Stickler PP Silver TC AP901

Stickler PP TC 50 micron top coated silver polypropylene film produced with a brilliant gloss surface for crisp colour reproduction and optimum print results. Suitable for a number of print methods, from letterpress UV, screen, flexographic and offset printing.
    Out of stock
    Material Description Price (exc. GST) Price (inc. GST) Qty
    186536 Stickler Silver PP AP901 1500mm x 6000m $2144.00  / 1000 M2 $2358.40  / 1000 M2 ?
    159079 Stickler Silver PP AP901 165mm x 2000m $2144.00  / 1000 M2 $2358.40  / 1000 M2 ?
    159080 Stickler Silver PP AP901 200mm x 2000m $2144.00  / 1000 M2 $2358.40  / 1000 M2 ?
    159082 Stickler Silver PP AP901 250mm x 2000m $2144.00  / 1000 M2 $2358.40  / 1000 M2 ?
    159085 Stickler Silver PP AP901 333mm x 2000m $2144.00  / 1000 M2 $2358.40  / 1000 M2 ?
    161309 Stickler Silver PP AP901 500mm x 2000m $2144.00  / 1000 M2 $2358.40  / 1000 M2 ?
    No available product with selected options.
    Stickler Silver PP can be used for a wide variety of applications where a demanding label substrate is required, from water, food & beverage, household, chemical and point of sale labels.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.

    Face Material: 

    Metallised silver – top coated polypropylene


    Test Method



    ISO 536

    45 g/m2


    ISO 534

    50 microns


    AP901   General Purpose Permanent  
    Permanent pure acrylic adhesive designed for films. Featuring high cohesion, good clarity and very good performance on non comparable substrates (PE,PP), approved for direct contact on the skin (plasters)


    Test Method


    Water based acrylic

    Direct sunlight resistance




    Application temperature (min)


    Service Temperature

    -40°C + 120°C

    Tack FTM9


    Ultimate adhesion FTM2



    Laminate shelf life

    24 months stored at 20°C/50%RH

    Typical laminate


    Total weight


    This technical specification includes our experience and know-how regards the following:

    a)     The composition of our products.

    b)     Their generic adhesive qualities normalised by means of the ISO procedure and regarding the international rule Finat generally accepted in this sector.

    Any reference to final use is subjected to our good knowledge and opinion and does not imply specific irrevocable guarantees for final use in end product labelling and packaging.

    Over and above these standards the product user is responsible for assessing, testing and ensuring the specific scope of the label in certain applications by means of prior generic official approval.

    WG White Glassine

    1 side siliconised supercalendered white glassine




    62 gsm


    55 microns