Stickler PE Clear TC AP901

Stickler PE TC Clear Gloss is a clear cast polyethylene top coated film offering optimum printability and superior registration hold compared to standard PE. Supplied with good clarity for optimum print results and label performance giving the stock a cloud free/high resolution finish.

    Face Material: 


    Test Method




    80 g/m2



    85 microns

    UV Exposure

    Depending on ink coverage:

    6 months

    Adhesive: AP901 General Purpose Permanent

    Permanent pure acrylic adhesive designed for films. Featuring high cohesion, good clarity and very good performance on apolar substrates (PE,PP), approved for direct contact on the skin (plasters).


    Water based acrylic


    Direct sunlight resistance






    Application temperature

    -5 (minimum)


    Service temperature

    -40°C to +120°C


    Tack FTM 9

    8 N/Inch2


    Ultimate adhesion FTM2

    7 N/Inch






    Laminate Shelf Life

    24 months stored at 20ºC/50% RH

    Typical Laminate Caliper

    165+/-6 ums (ASTM D374-88)

    Total Weight

    162+/- 6 (RIT.PP-032)

    This technical specification includes our experience and know-how regards the following:

    a)      The composition of our products

    b)      Their generic adhesive qualities normalised by means of the ISO procedure and regarding the international rule Finat generally accepted in this sector.

    Any reference to final use is subjected to our good knowledge and opinion and does not imply specific irrevocable guarantees for final use in end product labelling and packaging.

    Over and above these standards the product user is responsible for assessing, testing and ensuring the specific scope of the label in certain applications by means of prior generic official approval.

    WG 1 side siliconised supercalendered white glassine




    65 gsm


    56 microns



    Suitable for squeezable and flexible containers: e.g. shampoo, bath foam, body lotions.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.