Stickler Fluoro RP1001
Recommended for promotional, pricing, advertising and hazard labels. Also suitable for thermal transfer printing.
This technical specification includes our experience and know-how regards the following:
a) The composition of our products
b) Their generic adhesive qualities normalised by means of the ISO procedure and regarding the international rule Finat generally accepted in this sector.
Any reference to final use is subjected to our good knowledge and opinion and does not imply specific irrevocable guarantees for final use in end product labelling and packaging. Over and above these standards the product user is responsible for assessing, testing and ensuring the specific scope of the label in certain applications by means of prior generic official approval.
Face Material:
|
Properties |
Test Method |
Result |
|
Grammage |
ISO 536 |
70 g/m2 |
|
Caliper |
ISO 534 |
77 microns |
Adhesive: RP1001 Rubber Based Extra Permanent
A rubber based extra Permanent adhesive designed with high tack and adhesion, particularly on difficult and apolar substrates (PE,PP). Improved recipe for high speeed converting.
|
Properties |
Result |
|
Composition |
Rubber based Extra Permanent |
|
Direct sunlight resistance |
Excellent |
|
Cohesion |
Very high |
|
Application Temperature ºC |
0ºC minimum |
|
Service Temperature ºC |
-10 to +70 ºC |
|
Tack FTM 9 |
16 N/Inch2 |
|
Ultimate adhesion FTM2 |
9 N/Inch |
Laminate:
|
Laminate Shelf Life |
24 months stored at 20ºC/50% RH |
|
|
Typical laminate caliper |
151+/-6 ums |
ASTM D374-88 |
|
Total weight |
155+/- 6 |
RIT.PP-032 |
Suitable for different printing systems: letterpress, flexo, offset and gravure. Also for thermal transfer with selected ribbons.
YG – 1 side siliconised super-calendered white glassine
|
Properties |
Result |
|
|
Grammage |
65 g/m2 |
|
|
Caliper |
56 microns |
|
|
Transparency |
> 45% |
|