Stickler Excel Laser

Stickler Excel Laser is a high white uncoated smooth paper designed for laser print applications.

    Face Material: 

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    70.0 ± 5.0

    Caliper

    ISO 534

    107.0 ± 5.0


    Adhesive:                       LT1 – Laser Tac 1

     LT1 is a permanent acrylic adhesive, emulsion water based, offering a perfect combination of initial tack and adhesive strength, and an outstanding adhesion to most substrates.  LT1 is a multipurpose adhesive suitable for laser printing applications and high converting speeds.  Recommended for use on smooth, curved substrates with a diameter ≥ 30mm. 

    Properties

    Test Method

    Result

    Peel adhesion (N/25mm)

    FTM 1

    8.8

    Initial tack (N/25mm)

    FTM 9

    4.9

    Cohesion (h)

    FTM 8

    ≥ 3

    Minimum application temperature

     

    5°C

    Service temperature

     

    -20°C to +70°C


    Shelf life:      2 years when stored in its original packaging, at 23 ºC and 50% relative humidity. Do not expose to direct sun light. The substrate should be free of dust and lubricant before application.  Any unused portion should be rewrapped in the original packaging. This product should be tested thoroughly under use conditions to ensure it meets the requirements of the specific application.

    Uncoated white kraft paper with a high quality clay coating for good dimensional stability, density, and lay flat properties.  Consistent thickness and excellent strength for die cutting.

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    60 ± 5 gsm

    Caliper

    ISO 534

    60 ± 5 microns

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.