Stickler Coated 85 AP904 PET

Stickler Coated 85 AP904 PET is a white clay coated paper produced with medium gloss levels for quality 4 colour print reproduction. Designed for high speed label production. Stickler Coated 85 is suitable for all print methods.

Technical data

Face Material:

Properties	Test Method	Result
Grammage	ISO 536	85 g/m²
Thickness	ISO 534-80	70 micron

Adhesive: AP904 Permanent Acrylic adhesive

Good adhesion on a wide variety of materials including apolar surfaces.

Properties	Result
Composition	Acrylic permanent
Shear	Medium
Application temperature (min) °C	+5°C
Service temperature °C	-40°C to +100°C
Tack FTM 9	14 N/Inch
Ultimate adhesion FTM 2	11 N/Inch

Laminate

Laminate shelf life	24 months stored at 20°C/50% RH
Typical laminate caliper	119 ± 5 ums ASTM D374-88
Total weight	147 ± 5 gsm RIT.PP-032

Backing

PET30 - A one sided siliconised polyester liner for maximum strength on application and ideal glue coverage allowing no adhesive lines or distortions.

Properties	Result
Grammage	42 gsm
Caliper	30 microns

Important note

All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.