Stickler Board 150

Stickler Board 150 is a high quality woodfree machine coated art paper with a white gloss finish and excellent whiteness.
    Designed as an alternative for higher paper strength tags and cardboard labels.
    Compatible with most printing methods such as flexography, letterpress, offset, silkscreen, gravure and thermal transfer printing.

    Face Material:


    Test Method



    ISO 536

    150 g/m2


    ISO 534

    126 microns


    S-Type      Extra Permanent 

    Extra Permanent bond strength adhesion. Acrylic emulsion water based, with good adhesion under low temperature once applied.The adhesive complies with FDA regulation in 21 C.F.R. Section 175.105 for indirect contact application as the label that were intended to be used on the outside of food packaging material.




    Water based acrylic

    Food contact


    Cohesion (h)

    ≥3  FTM 8

    Minimum application temp (ºC)

    5 - 45ºC

    Service temp (ºC)

    -20 to +70ºC

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.