Rapid Jet Gloss AP901

Rapid Jet Gloss is a white glossy inkjet paper based material produced with a smooth even surface to allow fast drying and even colour formation. Inkjet gloss is a low weight and caliper, produced with a high optical density for excellent print reproduction and gloss appearance.

    Face Material: 

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    85 g/m2

    Caliper

    ISO 534

    100 microns

    Brightness

    ISO 2470

    91%

    Smoothness

    ISO 5627

    190sec/10ml

    Adhesive:     AP901   General Purpose Permanent

    Permanent pure acrylic adhesive designed for films. Featuring high cohesion, good clarity and very good performance on non comparable substrates (PE,PP), approved for direct contact on the skin (plasters) 

    Properties

    Result

    Composition

    Water based acrylic

    Direct sunlight resistance

    Excellent

    Cohesion

    High

    Application temperature

    -5°C (minimum)

    Service temperature

    -40 to +120°C

    Tack FTM 9

    8 N/INCH2

    Ultimate adhesion FTM2

    7 N/INCH

    Laminate: 

    Properties

    Result

    Laminate shelf life

    24 months stored at 23°C/50%RH

    Typical laminate caliper

    179 microns

    WG white glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.

    Properties

    Result

    Grammage

    60 gsm

    Thickness

    55 microns

    The substrate should be free of dust and lubricant before application. Please use once unwrapped, if stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under use condition to ensure it meets the requirements of the specific application.
    Inkjet gloss is recommended for inkjet label applications and convenient for several label usages with excellent photographic image and quick ink drying. This media is for inkjet printers and as such we do not recommend touching the printed image while drying (It may damage the printed appearance)
    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.