Pacesetter Self Adhesive Cast Coated - Wine
All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.
Face Material:
|
Properties |
Test Method |
Result |
|
Grammage |
ISO 536 |
80 gsm |
|
Thickness |
ISO 534 |
88 µm |
Adhesive: C Type
Permanent bond strength adhesive with hig tack under low temperature after being stuck on the substrate Recommended to use onto smooth and curved substrates with a diameter ≥ 30mm.
The adhesive complies with FDA regulation in 21 C.F.R. Section 175.105 for indirect contact application as the label that were intended to be use on the outside of food packaging material.
|
Properties |
|
|
|
Peel adhesion (N/25mm) |
11.8 |
FTM 1 |
|
Initial tack (N/25mm) |
8 |
FTM 9 |
|
Cohesion (h) |
≥3 |
FTM 8 |
|
Minimum application temp. (°C) |
-20 |
|
|
Service temp. (°C) |
-40 to 70 |
|
Backing: Uncoated white wood free paper with high quality of clay coated to make good
dimensional stability, better paper strength and excellent for die cutting.
|
Properties |
Test Method |
Result |
|
Grammage |
ISO 536 |
82 gsm |
|
Thickness |
ISO 534 |
87 µm |
2 year when stored at 23 °C, 50 % RH, in the original packaging:
- Storage must be clean and dry
- Keep the material in its original packaging when not in use to protect it from dust and contamination
- Do not expose to direct sunlight or heat sources