Pacesetter DigiSyn Self-Adhesive

Pacesetter DigiSyn Self-Adhesive is a synthetic film for use on dry toner printers. It is tear, water, oil and weather resistant.
    • Synthetic grade designed for use on dry toner printers
    • Water, oil and weather resistant                         
    • Tear resistant
    • PET Permanent adhesive, solid back
    • Labels
    • Stickers        

    The material should be stored in a dry area at room temperature. Direct sunlight should be avoided. After transport and storage in cold conditions the material should be acclimatized by airing in the printing room (1 h / cm of roll diameter or stack height).

    We always recommend that the sheet is test and trialled before commencing a print job. This is to determine that the sheet is suitable for the particular machine and the particular print job.

    Colour

    GSM

    White

    234

    • Dry toner compatible

     

    Typical Values

     

    50

    Composition

     

    Face material

    White polyester film, 50 micron with additional top coating

    Adhesive

    19 ± 2 g/m²

    Release liner

    140 g/m²
    Siliconised Paper

    Thickness (total)

    226 µm

    Weight

    234 g/m²

    Adhesion force (on stainless steel)

    20 min: › 5 N/inch (FTM 1)
    24 h: › 7 N/inch (FTM 1)

    Shear strength (on stainless steel)

    › 80 h (FTM 1)

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.