OLT Yupo S13

Yupo is a polypropylene film specifically designed with water, chemical and oil resistance. Manufactured with a smooth matt finish, it is used for a variety of applications where durability and the dimensional strength of a synthetic label are required. P22 (Acrylic) is a general permanent adhesive.
    • S13 (Acrylic) extra permanent adhesive for demanding label applications
    • Premium matt polypropylene
    • Supplied with a white glassine backing
    • Ultra smooth finish

    Face Material:   

    Properties

    Test Method

    Result

    Grammage

    JIS-P8124

    67 ± 5g/m2

    Caliper

    JIS-P8118

    86 ± 5microns


    Adhesive:  S-Type – Permanent Acrylic

    S-Type is a permanent acrylic adhesive, emulsion water based, offering a perfect combination of initial tack and strong adhesive.  With outstanding adhesion to most substrates including rough surfaces.  S-Type is a multi-purpose adhesive suitable for high converting speeds for optimal dispensing.  Recommended for use on smooth and curved substrates with a diametre ≥ 25mm.  

    The adhesive complies with FDA regulation in 21 C.F.R. Section 175.105 for indirect contact applications as the label is intended for use on the outside of food packaging material.  

    Properties

    Test Method

        Result

    Peel adhesion (N/25mm)

    FTM 1

    12.7

    Initial tack (N/25mm)

    FTM 9

    7.8

    Cohesion (h)

    FTM 8

    ≥ 3

    Minimum application temperature

    °C

    5°C

    Service temperature

    °C

    -20 to 70°C

    Laminate shelf life              24 months stored at 23°C/50% RH

    Typical Laminate caliper     160 ± 5 microns JIS-P8118, 150gsm JIS-P8117

    WG White Glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment. 

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    62 gsm

    Caliper

    ISO 534

    53 microns

    Opacity

    ISO 2471

    60%

    • 4-colour promotional outdoor labels
    • Security labels
    • Tickets and tags
    Yupo is suited to flexography, offset, gravure, rotary letterpress, and also embosses and foil stamps with ease. Its finish also provides exceptional thermal transfer capability, (provided correct ribbons are used - please consult your ribbon provider for correct ribbon requirements.

    The substrate should be free of dust and lubricant before apply. Please use once unwrapped, if stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under use condition to ensure it meets the requirements of the specific application.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.