OLT Yupo P22

Yupo is a polypropylene film specifically designed with water, chemical and oil resistance. Manufactured with a smooth matt finish, it is used for a variety of applications where durability and the dimensional strength of a synthetic label are required. P22 (Acrylic) is a general permanent adhesive.
    • P22 (Acrylic) general permanent adhesive
    • Premium matt polypropylene
    • Supplied with a white glassine backing
    • Ultra smooth finish

    Face Material:   

    Properties

    Test Method

    Result

    Grammage

    JIS-P8124

    67 ± 5g/m2

    Caliper

    JIS-P8118

    86 ± 5microns


    Adhesive:

    P-Type Permanent

    A water borne acrylic emulsion with excellent final tack. Adheres easily with minimal pressure, and suitable for less aggressive application requirements.

    Composition

    Water based acrylic

    Minimum application temperature

    5°C

    Service temperature

    -20 °C to +60 °C

    Food contact

    Indirect

    Ball tack

    17

    Initial tack

    390 N/m FTM9


                                               


    Typical Laminate caliper 157 ± 5 microns JIS-P8118 147gsmLaminate shelf life 24 months stored at 23°C/50% RH

    WG White Glassine - Allows high speed conversion and consistent dispensing on a wide range of equipment. 

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    62 gsm

    Caliper

    ISO 534

    53 microns

    Opacity

    ISO 2471

    60%

    • 4-colour promotional outdoor labels
    • Security labels
    • Tickets and tags
    Yupo is suited to flexography, offset, gravure, rotary letterpress, and also embosses and foil stamps with ease. Its finish also provides exceptional thermal transfer capability, (provided correct ribbons are used - please consult your ribbon provider for correct ribbon requirements.

    The substrate should be free of dust and lubricant before apply. Please use once unwrapped, if stock is to be returned to the storage shelf please ensure stock is wrapped and bagged to prevent surface dust and contamination. This product should be tested thoroughly under use condition to ensure it meets the requirements of the specific application.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.