OLT Cast Gloss C58

OLT Cast Gloss C58 uses high gloss, cast coated label paper intended for premium quality promotional and point of sales labelling. A label paper is designed to give excellent conversion and dispensing due to it's relatively high rigidity. Care should be taken when labelling curved surfaces.

    Face Material:

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    80 g/m2

    Caliper

    ISO 534

    86 microns

    Brightness

    ISO 2470

    88%

    Smoothness

    ISO 5627

    190 sec/10ml



    Adhesive:                       C58 Cold Temperature Permanent

     A water bourne acrylic emulsion with excellent initial and final tack. A superior cold temperature adhesive with superior adhesive force where condensation is present. Adheres easily with minimal pressure.  C58 is suited to smooth consistent surfaces such as glass, stainless steel, and PET.

     

    Composition

     

    Water based acrylic

    Initial tack

    FTM 9

    6.9 N/25mm

    Peel adhesion

    FTM 1

    11.8 N/25mm

    Cohesion

    FTM 8

    > 3

    Minimum application temperature

     

    -20ºC to +40ºC

    Service temperature

     

    -40 to +70ºC

    Food contact

     

    Direct contact for dry non-fatty foods




     

     


    Backing:   WG White Glassine

    WG white glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    62 gsm

    Caliper

    ISO 534

    53 microns

    Opacity

    ISO 2471

    60%

    Premium quality promotional and point of sale labelling.
    OLT Cast Gloss can be printed by rotary and flat-bed letterpress, flexography, offset and screen processes. Foil blocking, varnishing and thermal transfer are also possible using suitable inks and ribbons.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.