Manter Cotone Extra White Ultra WS SH-6020 Plus PET 30my

Manter Cotone Extra White Ultra WS SH-6020 Plus PET 30my is a natural 100% cotton paper with a high degree of whiteness. Ultra WS with anti-fungus treatment designed with added bulk for the most demanding graining and embossing label designs. Coated with ultra co-extrusion performance to ensure the highest water application resistance possible for an uncoated stock.

    Front Label 

    Reference

    COTONE EXTRA WHITE ULTRA WS

     

     

    General characteristics

    Natural 100% cotton paper with a high degree of whiteness, ULTRA WS and anti-fungus treatment. Due to the nature of the raw material used, there may be the small impurities and/or slight variations in tone and

    appearance which are normal in a natural product.

    Grammage (gr/m2) ISO 536

    130

    Thickness (µm) ISO 534

    210

    Adhesive 

    Reference

    SH-6020 PLUS

     

     

     

     

     

    General characteristics

    Permanent acrylic water based adhesive . Good adhesion to wet surfaces at low temperatures. Especially designed for glass containers, with excellent resistance to immersion in water/ ice.

    The research centre ISEGA has given the adhesive SH-6020 Plus approval according to the European requirements for indirect contact with foodstuffs and compliance with the rules of the Code of Federal Regulation s, FDA, 21 CFR Ch.l(April 1, 2013 edition)

    175.105. According to the FDA regulations the adhesive

    must be separated from the foodstuffs by a functional barrier.

    Tack (N) glass FTM-9

    >12

    Cohesion (h) 1kg FTM-8

    >2

    Labelling temperature (0 C)

    >5°C

    Usage temperature (0 C)

    -10°C/+ ?S°C

    Support

    Reference

    PET30

    General characteristics

    Clear polyester film.

    Grammage (gr/m2) ISO 536

    42

    Thickness (µm) ISO 534

    30


    Note: 

    The ultra WS treatment of the face material avoids the creases formation and reduces the water absortion on the face surface. Due to the high stiffness of this product, it is not recommended for labelling small diameter curved surfaces (bottle neck labels,...). We recommend the reels to be wound with the face side out. The test of resistance to immersion in water-ice is carried out by sticking a blank(unprinted) label on a standard glass bottle. Five days after the label is stuck on, it is submerged in an ice bucket containing icy water for a minimum period of 4 hours and its resistance to immersion is checked.

    2 years shelf life, under storage conditions as defined by FINAT section 2.5 (20-25°c, 40-50% RH). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life of the product.

    Recommended for high speeds labellings. Specially designed for product labels of high added value bottled in glass (wine, licquors, champagne, oil, water)

    Suitable for printing in Offset UV, Screen and hot foil

    Cotone Bianco can be printed with a variety of processes from, Screen, foil, and offset-printing. Due to the high degree of porosity we recommend that a primer / varnish is used prior to applying high build screen embellishments.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.