Manter Cotone Bianco Ultra PET

Manter Cotone Bianco Ultra PET is a 100% cotton paper with anti-fungus treatment designed with added bulk for the most demanding graining and embossing label designs. This product is coated with ULTRA co-extrusion performance to ensure the highest water application resistance possible for an uncoated stock.

    NOTE: Due to the nature of the raw material, there may be variations in colour and look depending on batch quality etc. Extra care should also be taken due to the label thickness; therefore Cotone Bianco is not suited to tight (narrow diameter) surfaces. Tests must be carried out to ensure the label thickness and conformation is to the intended requirements prior to running.

    Face Material: 

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    130 g/m2

    Caliper

    ISO 534

    175 microns


    Adhesive: 

    SH 6020 Plus - Permanent Acrylic adhesive

    Permanent acrylic adhesive. Strong initial adhesion, high tack and good cohesion. Specially suitable for all-purpose applications on wet surfaces at low temperature. Excellent resistance to ice water.

    Properties

    Test Method

    Results

    Tack

    N/Glass FTM-9

    >11

    Cohesion

    h/1kg FTM-8

    > 2

    Application temperature (min)

    °C

    > +5°C

    Service temperature (min)

    °C

    -10°C

    Service Temperature (max)

    °C

    75°C

    PET 30 Clear Polyester

    Polyester backing for maximum labelling performance.

    Properties

    Result

    Grammage

    42 gsm

    Caliper

    30 microns


    Suitable for applications where a high paper strength, card board label is required.

    Cotone Bianco can be printed with a variety of processes such as screen, foil, and offset-printing.      

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.