Manter Cotone Bianco Ultra

Manter Cotone Bianco is a 100% cotton paper with anti-fungus treatment designed with added bulk for the most demanding graining and embossing label designs. Coated with ultra co-extrusion performance to ensure the highest water application resistance possible for an uncoated stock.

    NOTE: Due to the raw material nature, there may be variations in colour and look depending on batch quality etc. Extra care should also be taken due to the label thickness; therefore Cotone Bianco is not suited to tight (narrow diameter) surfaces. Tests must be carried out to ensure the label thickness and conformation is to the intended requirements prior to running.

    Face Material: 

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    130 g/m2

    Caliper

    ISO 534

    175 microns

    Adhesive: 

    SH 6020 Plus - Permanent Acrylic adhesive

    Permanent acrylic adhesive. Strong initial adhesion, high tack and good cohesion. Especially suitable for all-purpose applications on wet surfaces at low temperature. Excellent resistance to ice water.

    Properties

    Test Method

    Result

    Tack

    N /Glass FTM-9

    >11

    Cohesion

    H /1kg FTM-8

    >2

    Application temperature (min)

    °C

    > +5°C

    Service temperature (min)

    °C

    -10°C

    Service Temperature (max)

    °C

    75°C

    CB80 - Super calendared white glassine paper

    Backing paper designed for automatic label generation. 

    Properties

    Test Method

    Result

    Grammage

    ISO 536

    78 gsm

    Caliper

    ISO 534

    67 microns

    Used in food and beverage, cosmetic, health care and wine labelling.

    Cotone Bianco can be printed with a variety of processes from, Screen, foil, and offset-printing.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.