LG LM41000
- Sand embossed textured matt clear vinyl floor graphic over-laminate with clear permanent solvent based adhesive and double side PE coated paper liner
- 200um film for longer non-slip usage & greater scratch resistance
- Perfect for internal floor graphics or indoor/outdoor vertical applications
- Up to 12 months durability for indoor floor graphic applications and up to 3 years outdoor when used in vertical applications
- Protecting from UV rays, scratch and abrasion
- Excellent durability and dimensional stability
- High skid- resistance
- Enhancing color of image
- Application
- Excellent protection from floor graphics.
- Suitable for indoor floor advertising
- Slip Rating: R9 (TEST REPORT NO: 371517-02)
Characteristics
|
Item |
Description |
|
Film |
7.9 mils(200 microns) Transparent film with gloss finish |
|
Thickness |
9.8 mils(250 microns) with adhesive (± 10%) |
|
Adhesive |
Acrylic based pressure sensitive (Solvent based) |
|
Adhesive color |
Clear |
|
Liner |
Double sides PE coated paper |
|
Application surfaces |
Flat, rounding etc |
|
Application temp. |
≥10℃(18 to 25℃ optimum) |
Durability
Durability is based on field experience and exposure tests in South Korea. Outdoor durability is 3 years when properly processed and applied (unprinted film vertical exposure)
Shelf Life
Shelf life is 1 year from factory shipment
Storage condition: Free from excessive moisture, temperature, direct sunlight (20℃ x 50% R.H)
|
Property |
Specification |
Test Method |
|
Thickness (Including adhesive) |
250㎛ ± 10% |
Micrometer |
|
Tensile strength |
≥ 1.8kg/cm |
ASTM 882 |
|
Elongation |
≥ 100% |
ASTM 882 |
|
Peel adhesion(24hrs) |
≥ 1,600g/in |
180 peeling PSTC-1 |
|
Service temp. range |
-25℃ ~ 82℃ |
Film applied Al panels 24hrs prior test |
|
Application temp |
≥ 10℃ |
18 to 25℃ optimum, on clean substrate |
|
Opacity |
Tt >80 |
Haze Meter (Tt: Transmission) |
|
Gloss |
10↓ |
@60, in Machine Direction |
|
Dimensional Stability |
Max 0.5mm |
Adhered to Aluminum Plate, Length Direction (80℃ Oven, 24hr , Average) |
|
Release liner thickness |
0.15mm ± 10% |
Micrometer |
Fabrication
Laminating
No heat is required. It can be used most squeeze roll laminators. Keep the film flat during lamination.
All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.
