Foamstar White XPS
Foamstar XPS is high quality white extruded polystyrene core (XPS) foam board with a white clay-coated matt paper surface on both sides. Foamstar XPS can be direct UV-curable inkjet printed and is suitable for internal applications. The extruded polystyrene core (XPS) offers a more aesthetic appearance and superior converting.
(Indoors Only)
- POP Displays - Medium to long term application
- Exhibits - Medium term application
- Framing - Long term application
- Internal signage - Long term
- Mounting
- Direct Digital printing
- Direct screen printing
- Routing, saw and knife cutting recommended
Thickness (MM) |
Sheet Size |
5.0 |
2440 x 1220 |
10.0 |
2440 x 1220 |
20.0 |
2440 x 1220 |
|
Tolerance |
Unit |
|||
Thickness |
5 |
10 |
20 |
±0.4 |
mm |
Substance |
580 |
760 |
1260 |
±50 |
g/m² |
Comp. Strength 10% strain |
≥9 |
≥16 |
≥16 |
|
N/cm² |
Curving |
≤2.0 |
≤1.5 |
≤1.5 |
|
% |
Bending Strength |
≥300 |
≥350 |
≥400 |
|
N/cm² |
Surface pH. Value |
7.0 ~8.0 |
|
|
||
Length and Width |
|
+4.0 ~ -0.2 |
mm |
||
Application |
INDOOR ONLY |
|
|
Composition - Surface
- White 120gsm clay-coated matte paper
- Suitable for direct UV-curable and screen-printing as well as mounting.
- pH neutral ranging from 7.0 ~ 8.0
- Water based adhesive (pH 7.0 ~ 8.0) used to laminate the paper liner to the core
- No lignin or toxic substances contained
Core (XPS)
- White extruded polystyrene core (XPS)
- XPS core is more dense and aesthetic pleasing compared to the extruded (EPS) polystyrene core
- XPS offers superior converting performance compared to the extruded (EPS) polystyrene core
- Core will be heat effected at 85ºC+
- No acidity or toxic
Direct screen & UV curable inkjet printing
All values presented in this data sheet provide the general characteristics of the product. It is the responsibility of the customer and/or end user to determine that the product is fit for the specific application it is to be used for.