dtec NoScrim Blockout Banner 510

dtec NoScrim Blockout Banner 510 is a scrimless, super smooth, double side blockout banner.

    • Scrimless, super smooth, double side blockout banner 
    • Suitable for applications that will be viewed up close 
    • Not recommended for outdoor use 
    • 2 side printable/a print side is on the outside of the roll 
    • Suitable for roll-up banner stands & premium graphics 
    • Ideal for applications where no show through & super smooth surface is critical 
    • Solvent, eco-solvent & UV curable inks

    Properties

    Unit of Measure

    Result

    Weight

    g/m²

    510

    Colour/Finish

     

    White/Matt

    Support Cloth

    DIN 60001

    Polyester

    Fabric Type

     

    Semi-Coated PVC

    Base Fabric Denier

     

    Nil

    Base Fabric Thread Count

     

    Nil

    Tensile Strength

    DIN EN ISO 1421

    1182x1173N/5cm

    Tear Strength

    DIN 53363

    34 x 27N/5cm

    Temperature Resistance

    ATSM D5035

    -20°C to 70°C

    Outdoor Life

     

    Not recommended for outdoor use

    Storage:

    The material must be stored at a temperature of 22°C +/‐ 2°C and 50% +/‐ 5% of relative humidity. Do not expose to direct sunlight. The area must be dry and clean. Please keep the material in the original packaging when not used in order to protect it from dust and contaminations.

    Outdoor Life:

    General life times refer to the durability of the unprinted face film when subject to vertical exposure in temperate, non‐extreme conditions. Actual performance life will depend on media and surface preparation and exposure conditions. For example the direction and angle of the sign; in areas of long, high temperature exposure; in areas of high pollution or high altitudes, outdoor performance will be decreased.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.