dtec Frontlit Banner 440 Gloss Black Back

dtec Frontlit Banner 440 Gloss Black Back is a gloss frontlit, high-strength, black backed banner.

    • Gloss frontlit, high-strength, black backed banner 
    • Thread count 9 x 9/sq inch 
    • UV additive for up to 12 months outdoor 
    • Solvent, eco-solvent, latex and UV curable inks 
    • Denier 1000D x 1000D 
    • Black back makes the banner 100% opaque 
    • 100% blackout performance 
    • Suitable for a range of billboard, banner & display graphics where no show through is required 
    • Print side is on the inside of the roll
    • Suitable for 1 side print
    • Suitable for outdoor and indoor use
    • Finishing: Welding, Sewing, Eyeleting

     

     

    Properties

    Test Method

    Result

    Total Weight

    DIN EN ISO 2286-2

    440 g/m² (±5%)

    Colour/Finish

     

    White/Gloss

    Base Fabric

    DIN 60001

    Knitted Polyester

    Base Fabric Denier

     

    1000D x 1000D

    Base Fabric Thread Count

     

    9x9/inch²

    Tensile Strength (warp/weft)

    ≥ 500/250 N/5cm

    1482/1219

    Tear Strength (warp/weft)

    ≥ 80/60 N/5cm

    285/265

    Outdoor Life

     

    1 year

    Storage:

    The material must be stored at a temperature of 22°C +/‐ 2°C and 50% +/‐ 5% of relative humidity. Do not expose to direct sunlight. The area must be dry and clean. Please keep the material in the original packaging when not used in order to protect it from dust and contaminations.

    Outdoor Life:

    General life times refer to the durability of the unprinted face film when subject to vertical exposure in temperate, non‐extreme conditions. Actual performance life will depend on media and surface preparation and exposure conditions. For example the direction and angle of the sign; in areas of long, high temperature exposure; in areas of high pollution or high altitudes, outdoor performance will be decreased.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.