dtec Pullup PET 290 Matt Greyback

dtec Pullup Pet Matt Greyback is a matt white 290gsm PET film with a grey blockout reverse
    • Quick dry, tear resistant & dimensionally stable lay flat film
    • Perfect for fixed and portable banner systems
    • Suitable for solvent, eco-solvent, UV Curable and Latex Inks
    • Pullup banner
    • Blockout

    Properties

    Result

    Base Material

    PET

    Colour/Finish

    White/Matt

    Coating Thickness

    40µ

    Film Thickness

    155µ (±5)

    Total Thickness

    190µ

    Total Weight

    290gsm (±10)

    Gloss % (ASTM D2457)

    60º: 40.0 ± 5.0 ≥

    85º: 20.0 ± 5.0 ≥

    Whiteness (L.a.b)

    ANSI T(D50/2º/Abs/No)

    L : 90.0 ≤

    a : 1.0 ± 2.0

    b : -4.0 ± 2.0

    Yellowness Index (ASTM D1925)

    29.0 ± 3

    Pin Hole (square metre)

    size : 1.0mm ≥ / 3ea ≥

    Dust

    size : 1.0mm ≥ / 3ea ≥

    Outdoor Life:

    General life times refer to the durability of the unprinted face film when subject to vertical exposure in temperate, non‐extreme conditions. Actual performance life will depend on media and surface preparation and exposure conditions. For example the direction and angle of the sign; in areas of long, high temperature exposure; in areas of high pollution or high altitudes, outdoor performance will be decreased.

    INK COMPATABILITY – Printing on the white side on the film

    • Solvent
    • Eco-Solvent
    • UV-Curable
    • Latex

    PRINTING CONDITIONS

    • 15~30°C / Humidity 30~60%
    All values presented in this data sheet provide the general characteristics of the product. It is the responsibility of the customer and/or end user to determine that the product is fit for the specific application it is to be used for.