dtec Banner Mesh with Liner

dtec Banner Mesh with Liner is a high strength banner mesh with a removable back liner used to catch excess ink.

    • PVC banner mesh with film backing which prevents ink spray through when printing
    • Traditional closed mesh structure
    • Suitable for 1 side print
    • Suitable for outdoor and indoor use
    • UV stabilised
    • Finishing: Welding, Sewing, Eyeleting 



    Test Method


    Total Weight

    DIN EN ISO 2286-2

    270g/m² (±5%)




    Base Fabric

    DIN 60001

    Knitted Polyester

    Base Fabric Denier


    1000D x 1000D

    Base Fabric Thread Count



    Tensile Strength

    DIN EN ISO 1421

    2008x1579 N/5cm

    Tear Strength (warp/weft)

    DIN 53363


    Outdoor Life


    1 year


    The material must be stored at a temperature of 22°C +/‐ 2°C and 50% +/‐ 5% of relative humidity. Do not expose to direct sunlight. The area must be dry and clean. Please keep the material in the original packaging when not used in order to protect it from dust and contaminations.

    Outdoor Life:

    General life times refer to the durability of the unprinted face film when subject to vertical exposure in temperate, non‐extreme conditions. Actual performance life will depend on media and surface preparation and exposure conditions. For example the direction and angle of the sign; in areas of long, high temperature exposure; in areas of high pollution or high altitudes, outdoor performance will be decreased.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.