dtec Banner Mesh
dtec Banner Mesh is a high strength banner mesh with no liner.
- High strength banner mesh (NO Liner)
- Denier 1000D x 1000D
- Suitable for welding & outdoor use
- Traditional closed mesh structure for greater print surface area and strength
- Thread count 12 x 12/inch
- Solvent, eco-solvent, Latex and UV Curable inks
Properties |
Test Method |
Result |
Total Weight |
DIN EN ISO 2286-2 |
270g/m² (±5%) |
Colour/Finish |
|
White/Matt |
Base Fabric |
DIN 60001 |
Knitted Polyester |
Base Fabric Denier |
|
1000D x 1000D |
Base Fabric Thread Count |
|
12x12/inch² |
Tensile Strength |
DIN EN ISO 1421 |
2008x1579 N/5cm |
Tear Strength (warp/weft) |
DIN 53363 |
490x284N |
Outdoor Life |
|
1 year |
Storage: |
The material must be stored at a temperature of 22°C +/‐ 2°C and 50% +/‐ 5% of relative humidity. Do not expose to direct sunlight. The area must be dry and clean. Please keep the material in the original packaging when not used in order to protect it from dust and contaminations. |
Outdoor Life: |
General life times refer to the durability of the unprinted face film when subject to vertical exposure in temperate, non‐extreme conditions. Actual performance life will depend on media and surface preparation and exposure conditions. For example the direction and angle of the sign; in areas of long, high temperature exposure; in areas of high pollution or high altitudes, outdoor performance will be decreased. |
All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.