Digitac One
- Promotional 100um monomeric vinyl, with 140gsm 2-sided PE coated liner
- Everyday vinyl for flat surfaces only
- Up to 1 year unprinted vertical durability
- Suitable for solvent, eco-solvent, UV-curable and latex printing
- Available in Clear Permanent, Grey Removable and Grey Airflow Removable in Gloss White or Matt White
All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.
Digitac One Clear Permanent technical data
FACE MATERIAL |
|
Type |
Calendared monomeric PVC film |
Colour/Finish |
White/Gloss or White/Matt |
Thickness |
100 μ ± 10% (without liner and adhesive) |
Elongation |
≥50% |
Tensile Strength |
≥20Mpa |
Dimensional Stability |
0.5mm max |
Outdoor Life Expectancy |
Up to 1 year* |
ADHESIVE |
|
Colour & Type |
Clear, Solvent based pressure-sensitive acrylic, permanent |
Thickness |
20±2 micron |
Initial Tack |
≥8N/m |
Holding Power |
≥10N/m |
Release Force |
50-150g/50mm |
Service Temp. |
-15ºC to +60ºC |
RELEASE BACKING |
|
Type |
2 side PE coated wooden pulp paper |
Colour/Finish |
White |
Weight |
140gsm ± 10% |
Digitac One Grey Removable technical data
FACE MATERIAL |
|
Type |
Calendared monomeric PVC film |
Colour/Finish |
White/Gloss |
Thickness |
100 μ ± 10% (without liner and adhesive) |
Elongation |
≥50% |
Tensile Strength |
≥20Mpa |
Dimensional Stability |
0.5mm max |
Outdoor Life Expectancy |
Up to 1 year* |
ADHESIVE |
|
Colour & Type |
Grey, Solvent based pressure-sensitive acrylic, removable |
Thickness |
20±2 micron |
Initial Tack |
≥6N/m |
Holding Power |
≥8N/m |
Release Force |
50-150g/50mm |
Service Temp. |
-15ºC to +60ºC |
Removability |
Easy to be removed in 12 months |
RELEASE BACKING |
|
Type |
1 side PE coated wooden pulp paper |
Colour/Finish |
White |
Weight |
140gsm ± 10% |
Digitac One Grey Airflow Removable Technical Data
FACE MATERIAL |
|
Type |
Calendared monomeric PVC film |
Colour/Finish |
White/Gloss |
Thickness |
100 μ ± 10% (without liner and adhesive) |
Elongation |
≥50% |
Tensile Strength |
≥20Mpa |
Dimensional Stability |
0.5mm max |
Outdoor Life Expectancy |
Up to 1 year* |
ADHESIVE |
|
Colour & Type |
Grey, Solvent based pressure-sensitive acrylic, removable |
Thickness |
20±2 micron |
Initial Tack |
≥6N/m |
Holding Power |
≥8N/m |
Release Force |
50-150g/50mm |
Service Temp. |
-15ºC to +60ºC |
Removability |
Easy to be removed in 12 months |
RELEASE BACKING |
|
Type |
1 side PE coated wooden pulp paper |
Colour/Finish |
White |
Weight |
140gsm ± 10% |
Storage: |
The material must be stored at a temperature of 22°C +/‐ 2°C and 50% +/‐ 5% of relative humidity. Do not expose to direct sunlight. The area must be dry and clean. Please keep |
*Outdoor Life: |
General life times refer to the durability of the unprinted face film when subject to vertical exposure in temperate, non‐extreme conditions. Actual performance life will depend on media and surface preparation and exposure conditions. For example the direction and angle of the sign; in areas of long, high temperature exposure; in areas of high pollution or high altitudes, outdoor performance will be decreased. |