Clear Focus SunSecure
Clear Focus SunSecure is a composite white (adhesive side) / black perforated 8 -mil polymeric vinyl that can be interior mounted to commercial and residential windows requiring security priivacy and for heat and light control and glare reduction applications.
- Suitable for long term, interior mount applications on flat surfaces only
- Not printable
- Used for windows requiring security privacy and for heat and light control and glare reduction applications
Applications: Interior mount to commercial and residential windows requiring security, privacy and for heat and light control and glare reduction applications. Not designed for printing. Refer to the Recommended Applications Fact Sheet.
Makeup: Calendered polymeric flexible perforated white (adhesive side) / black (no adhesive) composite gloss PVC with clear pressure-sensitive adhesive and dual layer liner comprising clear plastic PET liner laminated to perforated paper layer.
Vinyl Thickness: 203 microns, approx.
Release Liner: 178 microns, approx.
Adhesive: 25 microns, approx. Removable acrylic adhesive
Perforation Size and Pattern: 1.5mm , 35% / 65% open/closed areas
Standard Widths/Lengths: 1370mm x 30.48m on 76mm core
Dimensional Stability: Good
Application Temperatures: Recommended: 15°c to 25°c, Min: 5°c Max: 30°c (in shade)
Service Temperatures: -17°c to +60°c
Expected Lifetime Exterior: 2 - 3 years. 6 months for clean removal. Adhesion may increase with time.
Water & Humidity Resistance: Very good water resistance, fair humidity resistance
Solvent Resistance: Good
Storage Stability: 9 months shelf life when stored at 21°c & 50% relative humidity
Solar Heat Gain Coefficient: 0.40 (tested on 4.76mm clear single glaze glass)
Percent Reduction of Heat Transfer: 52%
Ultraviolet Blockage: 0.917
Matching Overlaminate: Not needed, but if required then Clear Focus CurvaLam
Installation: Refer to the Surface Preparation and Installation Instruction Fact Sheets. Apply to clean, dry glass surface. Use mild soap (wax free) and water, dry glass well. Do NOT use ammonia, Windex® or other solvent-based glass cleaner prior to application. Do not use heat.
Removal Refer to the Care & Removal Fact Sheet. Remove by peeling from surface.
Warranty and Disclaimer: Refer to the Warranty Statement Fact Sheet. The information in this data sheet is presented for reference and illustration of general product characteristics only. The information does not constitute a representation or warranty relating to the suitability or fitness for a particular application or otherwise create guarantees of product performance. In all cases, purchasers should independently determine, prior to use, the suitability of this product for their specific application.