Clear Focus ClearVue Interior

Clear Focus ClearVue Interior is a clear 6.5 mil perforated monomeric vinyl with a clear removable acrylic adhesive. Interior mount to building windows and glass doors requiring protection from weathering, abrasion and vandalism, including POP, retail and commercial graphics. 

    • Suitable for protection from weathering, abrasion and vandalism
    • Perforation size is 1.6mm
    • Expected lifetime - 1 year
    • Open area is approximately 40%

    Makeup:  Calendered monomeric perforated clear PVC with clear pressure-sensitive adhesive and dual layer liner comprising white PET liner laminated to perforated paper layer.

    Vinyl Thickness: 165 microns, approx

    Release Liner: 178 microns, approx

    Adhesive: 25 microns,  approx. Clear removable acrylic pressure sensitive adhesive

    Perforation Pattern and Size: 1.6mm, 40% / 60% open/closed areas

    Standard Widths/Lengths:  1370mm x 30.48m

    Dimensional Stability: Good

    Application Temperatures Recommended: 15°c to 25°c, Min: 4°c Max: 30°c (in shade)

    Service Temperatures: -17°c to +60°c

    Solvent Resistance: Good

    Storage Stability: 1 year shelf life when stored at 21°c & 50% relative humidity

    Water and Humidity Resistance: Fair

    Expected Lifetime Exterior: 1 year. 6 months for clean removal. Adhesion may increase with time.


    Refer to the Ink Compatibility Fact Sheet. Compatible with screen, solvent, UV cure. Testing recommended before production to determine appropriate settings. Allow sufficient curing time between each layer of ink. For UV-cure, do not print inline and laydown less ink to prevent ink bridging the perforations.
    1) Print reverse image (mirror image) on clear vinyl. Do not print on liner.
    2) Next, overprint white over the CMYK layer.
    3) For optimum One Way Vision effect, overprint black over the white layer.
    For a softer translucent effect without one-way visibility, it is possible to print normally without adding the white and black coats of ink.

    Out Gassing:  3 - 5 days suspended vertically in well ventilated area. Trim after out gas period.

    lnstallation: Refer to the Surface Preparation and lnstallation lnstruction Fact Sheets; Apply to clean, dry glass surface. Use mild soap (wax free) and water, dry glass well. Do NOT use amonia, Windex@ or other solvent-based glass cleaner prior to application. Do not use heat. For use roll fed cold laminator.

    Removal Refer to the Care and Removal Fact Sheet. Remove by peeling from surface.

    Warranty and Disclaimer : 

    Refer to the Warranty Statement Fact Sheet. The information in this data sheet is presented for reference and illustration of general product characteristics only. Theinformation does not constitute a representation or warranty relating to the suitability or fitness for a particular application or otherwise create guarantees of product performance. ln all cases, purchasers should independently determine, prior to use, the suitability of this product for their specific application.

    All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.