3M™ Print Wrap Film IJ280 is a printable white lustre wrap film with new 3M Comply v4 Air Release and proprietary adhesive for fast, easy, bubble-free installations. 3M™ Print Wrap Film IJ280 are a best in class vehicle wrap designed for converters and installers. Backed globally by the 3M™ MCS™ Warranty, this print wrap solution delivers exceptional performance, print quality and productivity, leading to faster installations with less rework.
- Pressure-activated adhesive for easy sliding, tacking, snap-up and repositioning
- Comply™ v4 adhesive with air-release channels for fast, easy, bubble-free installations
- Excellent hiding power
- Flexible; conformable with less heat (especially when paired with 3M™ Gloss Wrap Overlaminate 8428G)
- Superior conformability with heat for applications on recesses and deep channels
- Removable with heat from most surfaces within the Warranty Period
- Expected Performance Life of 10 years (unwarranted period for unprinted film with no graphic protection, applied to a flat, vertical, outdoor surface)
- Up to 20% faster to install & proven to lift 2x less
For use with over laminates 8428G, 8518, 8519, 8520, 8548G, 8549L, 8550M & 8528
• Wraps for vehicles, straight trucks, semi-trucks and semi-trailers; emblems or striping
• Watercraft graphics (above the static water line only)
• Non-vertical and horizontal vehicle wraps (when protected with specified 3M™ overlaminates)
• Bus and transit graphics
All statements, technical information and recommendation are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties of merchantability and fitness for the purpose: Sellers and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.